| |
Jaszczak SPECT Phantom
ECT Phantom for PET and SPECT.
The Jaszczak SPECT Phantom provides
consistent performance information for any SPECT or PET system. Multiple
performance characteristics of camera-based SPECT systems are evaluated from
a single scan of the phantom.
On-axis and off-axis transverse line spread
function may be easily measured without removing the cover plate.
Measurements of full-width-half (or tenth) maximum can be readily
determined, either in air or in water.
The Phantom is used for:
|
System performance valuation of:
Collimator, Artifacts, Calibration, and Reconstruction Parameters |
|
Acceptance testing |
|
Routine quality, assurance and control |
|
Evaluation of center-of-rotation error |
|
Evaluation of non-uniformity artifact |
|
Evaluation of changes of
radius-of-rotation on spatial resolution |
|
Evaluation of reconstruction filters on
spatial resolution |
|
Evaluation of attenuation and scatter
compensation |
|
Single slice volume sensitivity |
|
Total system volume sensitivity |
|
Lesion detectability |
SPECT Phantoms are available in two models.
The Deluxe Phantom is used for high resolution cameras. The Standard Phantom
is used for lower resolution.
| Cylinder Interior Dimensions:
8.5" dia x 7.32" h (21.6 x 18.6 cm) |
| Cylinder Wall Thickness: 0.125" (3.2 mm)
|
| Volume: 6.75 L |
| Volume With Inserts: 6.1 L |
| Cold Rod Insert Height: 3.46" h (8.8 cm)
|
| Height of Spheres From Base Plate: 5" h
(12.7 cm) |
043-750 SPECT Phantom, Deluxe
| Cold Rod Dimensions: 4.8 mm, 6.4 mm, 7.9
mm, 9.5 mm, 11.1 mm, 12.7 mm |
| Solid Sphere Diameters: 9.5mm, 12.7 mm,
15.9 mm, 19.1 mm, 25.4 mm, 31.8 mm |
043-762 SPECT Phantom, Standard
| Cold Rod Dimensions: 6.4 mm, 7.9 mm, 9.5
mm, 11.1 mm, 12.7 mm, 16.0 mm |
| Solid Sphere Diameters: 12.7 mm, 15.9 mm,
19.1 mm, 25.4 mm, 31.8 mm, 38 mm |
* NOTE: Manufactured by Data Spectrum
|
043-750 |
Phantom,
SPECT, Deluxe |
|
|
043-762 |
Phantom,
SPECT, Standard |
|
Related:
|
043-730 |
Phantom
Insert, Triple Line |
|
|
043-751 |
Phantom
Insert, Hot Spot
For 043-750 and
043-762 |
|
|
043-610 |
Phantom
Insert, Ultra Deluxe Cold Rod |
|
|
043-763 |
Phantom
Insert, Hollow Sphere |
|
|
043-764 |
Phantom
Insert, Micro Hollow Sphere |
|
|
043-777 |
Phantom
Insert, Cardiac |
|
|
|
|
|