| |
Radlink CR Pro
Computed Radiography System |
|
CR Pro™—Computed Radiography System
Utilizing Radlink’s “sealed Fiber-Optic laser technology” (patent
pending), the CR Pro delivers high-resolution, diagnostic-quality
images. The equipment requires little or no internal calibration or
adjustment during its service life. The CR Pro is a system solution with
imbedded CPU and complete image acquisition, storage, and Digital
Imaging and Communications (DICOM) 3.0. Due to its very low cost, the
solution is available to a larger customer population. The system also
provides a rich set of application options such as DICOM print, Modality
Worklist, CD burning, DICOM compliant image compression and image
processing.
|
CR Pro™ Advanced CR for Accuracy and Productivity
For Diagnostic PACS in High Productivity Areas
The CR Pro is a high-productivity, small-footprint, 15-bit CR
designed for all primary diagnostic applications that demand
clinical accuracy and rapid cycle times. The CR Pro is fully
automatic and accepts a variety of cassette sizes up to 14″ x 17″.
Advanced Image Plate Handling Technology
To maximize the useful life of costly image plates, the CR Pro is
designed as a cassette-based system, so that the operator never
risks causing damage by handling the image plate. To further
maximize service life, the image plate is mounted on a rigid
substrate and is never bent or touched, in any way, by the feed
mechanism.
Consistent Image Accuracy
Utilizing sealed Fiber-Optic laser technology, the CR Pro is
designed to provide consistently high image quality with less
downtime of periodic cleaning and preventative maintenance than
other tabletop CR devices. The 15-bit laser CR Pro will deliver fast
performance, consistent image accuracy and years of reliability
typically found only with systems costing twice as much.
Complete System
The CR Pro is a system solution with embedded CPU and complete image
acquisition and DICOM transmission capabilities. Installation and
training of the integrated solution can be completed in one day. The
solution is simple and will fit into any workflow environment,
whether stand-alone, PACS or Teleradiology.
System Mobility
The new sealed Fiber-Optic laser technology allows the CR Pro to be
designed as a stand-alone, console-based unit on wheels that can
easily be moved throughout your facility.
|
System Specifications
|
Supported Plate
Sizes |
8″ x 10″, 10″ x 12″, 14″ x 14″, 14″ x 17″ |
Grayscale
Resolution |
15 bits per pixel |
Throughput
|
Est. 31 plates/hr./14″ x 17″
44 plates/hr./8″ x 10″
|
Integrated
Software |
Image Acquisition, Preview Images,
Image Processing, Image Manipulation,
DICOM 3.0 Image Transmission
|
Output Interface
|
Ethernet |
A Total Solution
|
The CR Pro is a turn key solution ready for
portable, mobile and remote applications. |
|
Physical
Specifications |
CR Type |
Console, Portable |
Digitizer Type
|
Cassette Loader, Auto Erase, High Image Quality,
Fast Duty Cycle
|
Dimensions
|
26.5″ (w) x 21″ (d) x 42″ (h) without monitor
|
Footprint
|
3.86 sq. ft. |
Weight |
98 lbs. |
Power |
100-240 VAC, 47-63 Hz, 5 Amps |
|
Learn More
Literature
|