Spine-Techline
and Ortho-Techline
The Versatile, Quality
Illuminator Designed Specifically for Full Spine and Long Bone Film
Viewing...Used Extensively by Chiropractors, Osteopaths, Orthopedists,
Veterinarians and Wherever 14” x 36” or 14” x 51” Film Formats Apply.
Its many features and
benefits include...
Available in two models: SPINE-TECHLINE 14” x
36”
(1) Allows for viewing of a single 14
x 36” film or multiple 14 x 17” film formats
ORTHO-TECHLINE 14” x 51”
(1) Allows for viewing of a single 14
x 51” film or multiple 14 x 17” film formats
Two Distinct Lighting Configurations
(1) SPINE-TECHLINE (14 x 36”) 200
series provides a standard two lamp light source for films of normal density
(2) SPINE-TECHLINE (14 x 36”) 400 series
provides a high intensity four lamp light source
(3) ORTHO-TECHLINE (14 x 51”) 200 series
configurations provides a standard two lamp light source for films of normal
density
(4) ORTHO-TECHLINE (14 x 51”) 400 series
provides a high intensity four lamp light source.
(5) Light placement, coupled with
reflective interior provides optimum light distribution
U.L. & CSA Listed
(1) All SPINE-TECHLINE fixtures are
U.L. & CSA listed
(2) All ORTHO-TECHLINE fixtures are U.L.
& CSA listed
(3) Meets all hospital, clinic, and other
construction safety requirements and standards
Baked Enamel Inner Reflective Surface
(1) Provides even to-to-bottom,
side-to-side illumination
(2) Eliminates “hot spots” and minimizes
eye strain
TECH-GRIP, Roller Gravity Film Holding System
(1) Engineered design provides
maintenance free reliability and performance
(2) Accommodates all film thicknesses and
requires no field adjustment
(3) The TECH-GRIP is medium GRAY in color
on a white illuminator background to conform with most medical facility decors
Side Mounted Film Clip (STANDARD) (Left Side
Only)
(1) Left side mounted Film Clips are a
standard SPINE-TECHLINE and ORTHO-TECHLINE feature.
(2) Side Film Clips provide flexibility
to read multiple films or other 14 x 17” film formats.
(3) Additional film clips can be easily
field installed on an outside edge of an existing fixture and are available at
an optional cost.
Acrylic Viewing Panel
(1) Shatterproof translucent panel
provides even light diffusion
(2) Panel provides a smooth, uniform, and
flaw free surface for clear film reading.
(3) Panel’s sanitary surface is easily
cleaned.
(4) Panel is U.L. approved.
Slim Steel Body Construction
(1) Slim 3-3/8” depth on SPINE-TECHLINE
and 3-7/8” depth on ORTHO-TECHLINE is visually unobtrusive, clean and simple.
(2) Durable steel construction is
resistant to damage.
(3) No exposed screws, hardware or sharp
edges.
Baked Enamel Outer Finish
(1) Sanitary, easy to clean surface
resists harsh cleaning materials frequently used in hospital environments.
(2) Chip and wear resistant.
(3) Standard hospital white color
provides cosmetic compatibility with facility decor.
Engineered Design Easily Serviced
(1) All surface and recessed mounted
fixtures can be serviced without removing them from their installed position.
(2) Plexiglas panels are easily removed
for cleaning and lamp replacement without the requirement of tools.
(3) Each SPINE-TECHLINE 200 or 400 series
viewing area has a separate front wireway panel, which is easily removed for
access to internal electrical components.
Cluster Switching for Multi-Panel Units
(STANDARD)
(1) Single, centrally located control
area (bottom center of all SPINE & ORTHO TECHLINE fixtures) providing maximum
operating convenience.
(2) Simple switch pattern, which
correlates to panel layout, allows for instinctive control of all lighted
surfaces.
Film Activated Micro Switches (FAS)
(OPTIONAL)
(1) Provides operating convenience by
activating the lamps when the film is inserted in the film grip.
(2) Eliminates excess light from
surrounding panels when the film-activated mode is used.
(3) Reduces room heat build up from any
panel that is not being used.
(4) Three-way rocker control switch
allows flexibility for constant light or film activated light.
Multi-Panel Master Switch (OPTIONAL)
(1) Single master switch provides
convenient ON/OFF fixture control.
Electrical and Other Specifications
ELECTRICAL
110-124 Volt 60 Hz:
| SPINE-TECHLINE 200
SERIES..........0.67 Amps per panel |
| SPINE-TECHLINE 400
SERIES..........1.34 Amps per panel |
| ORTHO-TECHLINE 200
SERIES.........0.73 Amps per panel |
| ORTHO-TECHLINE 400
SERIES.........1.46 Amps per panel |
All SPINE-TECHLINE fixtures are U.L. &
CSA listed.
All ORTHO-TECHLINE fixtures are U.L. &
CSA listed.
*Grounded chassis with 3-wire 7-ft. Cord
and NEMA 5-15, 2-pole, 3-wire grounded plug.
*No hazardous electrical parts are
exposed when the diffusing panel is removed for lamp replacement.
LAMPS:
General Electric:
#F30T12/D or equivalent (for SPINE-TECHLINE
fixtures)
#F40T12/D or equivalent (for ORTHO-TECHLINE
fixtures)
BALLAST:
MAXANT’s ballast has premium features
as follows:
| Rapid start ballast which does not require an external starter |
| U.L. and CSA approved |
| Thermal protected—the ballast will disconnect from the powerline in the
event of excess heat |
| Low leakage |
| Self start reliability in excess of 10,000 cycles |
| Anticipated 50,000 hours operating life |
| Suppression of conducted radio frequency transmission into power lines
|
CONSTRUCTION
Each unit is
welded steel construction. Multi-panel units are manufactured as an integral
assembly.
FILM GRIP
Roller gravity
film holding system accommodates all film thickness variations. Will not scratch
or tear film. Requires no field adjustment. Open sides facilitate the viewing of
oversize film.
DIFFUSING PANEL
Diffusing panel
is shatter resistant, U.L. recognized Plexiglas, MC thermoplastic
SWITCHES
A two-position
rocker switch, which provides ON/OFF lighting to each panel, is standard. The
optional film activated switch has three position rocker switch which provides
manual ON/OFF and FILM ACTIVATED LIGHTING which activates when a film is
inserted into the film grip.
The optional
master switch for multi-panel units is a two position rocker switch which
provides a master ON/OFF for the entire unit.
Cluster
switching is standard on multi-panel units. The switches are centrally located
at the bottom of the fixture, configured in the same layout as the viewing
panels they control.
Surface
Mounted Models
Stock #
|
No. of Lamps
|
Configuration
|
Viewing Area
|
Length
|
Height
|
Shipping Wt.
|
STS-21
|
2
|
1 Panel
|
14"x36"
|
14"
|
42"
|
28
|
STS-22
|
2
|
2 Panel
|
28"x36"
|
28"
|
42"
|
56
|
STS-23
|
2
|
3 Panel
|
42"x36"
|
42"
|
42"
|
84
|
OTS-21
|
2
|
1 Panel
|
14"x51"
|
14"
|
58"
|
38
|
OTS-22
|
2
|
2 Panel
|
28"x51"
|
28"
|
58"
|
76
|
STS-41
|
4
|
1 Panel
|
14"x36"
|
14"
|
42"
|
33
|
STS-42
|
4
|
2 Panel
|
28"x36"
|
28"
|
42"
|
66
|
STS-43
|
4
|
3 Panel
|
42"x36"
|
42"
|
42"
|
99
|
OTS-41
|
4
|
1 Panel
|
14"x51"
|
14"
|
58"
|
43
|
OTS-42
|
4
|
2 Panel
|
28"x51"
|
28"
|
58"
|
86
|
Recess
Mounted Models
Stock #
|
No. of Lamps
|
Configuration
|
Viewing Area
|
Length
|
Height
|
Shipping Wt.
|
STR-21
|
2
|
1 Panel
|
14"x36"
|
14.75"
|
42.75"
|
33
|
STR-22
|
2
|
2 Panel
|
28"x36"
|
28.75"
|
42.75"
|
62
|
STR-23
|
2
|
3 Panel
|
42"x36"
|
42.75"
|
42.75"
|
91
|
OTR-21
|
2
|
1 Panel
|
14"x51"
|
14.75"
|
58.75"
|
44
|
OTR-22
|
2
|
2 Panel
|
28"x51"
|
28.75"
|
58.75"
|
82
|
STR-41
|
4
|
1 Panel
|
14"x36"
|
14.75"
|
42.75"
|
39
|
STR-42
|
4
|
2 Panel
|
28"x36"
|
28.75"
|
42.75"
|
73
|
STR-43
|
4
|
3 Panel
|
42"x36"
|
42.75"
|
42.75"
|
106
|
OTR-41
|
4
|
1 Panel
|
14"x51"
|
14.75"
|
58.75"
|
48
|
OTR-42
|
4
|
2 Panel
|
28"x51"
|
28.75"
|
58.75"
|
91
|
|