THE FISSION-PRODUCT PHANTOM

The Fission-Product Phantom is partially modeled after the Lawrence Livermore Realistic Phantom. It was developed by RSD to meet the needs of nuclear power stations and other facilities where more organs are needed than are provided by the Lawrence Livermore Realistic Phantom.

This phantom may be used on a couch, in a chair or standing. It includes the head and neck, the complete torso and stub legs articulated at the hips (which are also needed for the sitting position). The same access to the torso cavity is provided as in the Livermore Phantom.

The materials of construction are RSD multi-energetic formulations. The skeleton has been extended to include the head and full torso. The RSD “Superhuman Skeleton,” which is multi-energetic, is used. RSD materials closely meet the standards of the International Commission on Radiation Units and Measurements (ICRU) Report No. 44 (Tissue Substitutes in Radiation Dosimetry and Measurement, 1989).

Organs

The organs of the Lawrence Livermore Realistic Phantom fit exactly into the Fission-Product Phantom, but RSD has modified the internal construction to accommodate additional organs: thyroid, kidneys, stomach, spleen, pancreas, and small and large intestines.

The Fission-Product Phantom system is shipped with inert organs. Any or all organs can be replaced by radioactive organs, which are shipped in separate packages.

The same choices of nuclide loadings are available for active organs as for the liver of the Livermore Phantom (uniformly dispersed in the molding materials, hollow shells or with hold grids).

Chest Overlay Plates

These are fitted specifically to the Fission-Product Phantom and are not interchangeable with the Livermore Phantom.

Radionuclides

RSD routinely manufactures active organs with isotopes to suit users’ needs. Active capsules to fit into the gridded holes are available, or empty capsules can be supplied to be filled by the user.

RSD usually supplies the required isotopes, but users may furnish them if so desired.

Isotopes are most often received as calibrated solutions, traceable to the NIST. Organ loading is controlled by micropipetting aliquots from the calibrated solutions. Uraniums and plutoniums are traceable to the NIST by mass. Other isotopes are usually traceable by activity.

Some isotopes are manufactured only at intervals throughout the year, so delivery is subject to availability. In some cases, calibration costs from governmental sources are subject to wide fluctuations.

RS-550 FISSION-PRODUCT PHANTOM SYSTEM:  Includes: head, neck, neck cover plate for thyroid access, complete torso and gridded torso cover, inert heart, lungs, lymph nodes, thyroid, liver, kidneys, stomach, pancreas, spleen, small and large intestines. Stub legs with pivot bolts. Documentation. Permanent shipping and storage case.
 

RS-520 Active Capsule (Isotope and activity to be specified)

RS-521 Inert Capsule with sealing cap, to be filled by user

Chest Overlay Plates

FISSION-PRODUCT ORGANS

We also offer our Whole Body Pixy, Wounded Willy and Damaged Debbie along with sectional phantoms for all your modalities.

Related Products:  Alderson Radiation Therapy (ART), Whole Body Pixy & Take-Apart Pixy, Wounded Willy and Damaged Debbie, Anthropomorphic Sectional phantoms, Lawrence Livermore Realistic Phantom, CT Head Phantoms, Angiographic Head Phantom, Radiation Therapy Treatment Brassiere

 Download our Quote Request form  (type right in the PDF file or write in it), and email it to [email protected]

Copyright © 2004 JZ Imaging & Consulting
Last modified: 07/08/14