The narrow Fiberesin™
tabletop of the
Brachytherapy C-Arm
Table is cantilevered to
accommodate portable or
ceiling suspended
C-Arms. Radiolucent
areas are free of cross
members, allowing full
fluoroscopic
visualization and
unobstructed C-Arm
positioning. Optional
Cassette Tray and X-ray
Grid allow for use of
overhead or portable
x-ray. Functional design
provides complete access
while minimizing
radiation exposure to
clinicians.
Designed
and equipped
specifically for seed
implantation procedures
the Brachytherapy C-Arm
Table features a
radiolucent extension
that provides capability
for brachytherapy
treatment involving the
upper body and general
C-Arm applications.
Motorized actuation of
height, X-Y, lateral
roll and Trendelenburg
motions of the tabletop,
with pre-programmed
features, ensure quick
and safe tabletop
positioning during any
phase of a procedure.
Control made easy
The LCD screen of the
Main Control Panel
displays actual tabletop
position (all axes) in
real time, and provides
menus and prompts for
other functions. Up to
ten position sets are
stored. A "Level" button
brings the table to 0°
tilt and 0° lateral roll
while "Home" both levels
and lowers the tabletop
to minimum height for
patient transfer. The
portable hand-held and
foot-operated
controllers also adjust
the table. The Joystick
Controller is used for
motorized X-Y
positioning and features
proportional speed
control.
More adjustments and
features...
The Fowler back adjusts
with a touch-handle
lock/unlock mechanism to
an 80° angle with
incremental stops at
20°, 30°, 40°, 50°, 60°,
70° and 80°.
The table comes with
a lightweight
non-imaging patient
transfer extension and a
radiolucent extension.
The radiolucent
extension is made for
vascular, cardiac, and
other general
C-Arm applications. A
standard OR accessory
rail makes stepper
positioning quick and
easy. Select from knee
crutches or the PAL
stirrups, standard or
Dura Board arm
boards—configure the
table to your exact
specifications.
Both AC and battery
power are standard.
Eliminate power cords
with battery operation.
An optional battery,
with separate charging
unit, can provide
cordless operation.
Both AC and battery
power are standard. When
operating on battery,
there are no power cords
to catch on feet or
block table wheels.
Battery charging can be
accomplished during off
hours by plugging in the
AC power cord. An
optional battery with
separate charging unit
can provide continuous
cordless operation.